hybrid ic v la308 - 055r isolated type dc - dc converter description the vl a308 - 055r is a n isolated dc - dc converter design - ed to control the industrial equipment. it can convert the high voltage to low voltage. total output power is 5.0 w. features ? input ------------ dc 90 v to 60 0 v dc ? output ----------- + 5.0 v, 1.0 a ( 5.0 w) ? electrical isolation (between input and output s ) ------------- 2 500vrms 1 minute applications on board p ower supply for control equipment outline drawing dimensions : mm block diagram
hybrid ic v la308 - 055r isolated type dc - dc converter 2 maximum ratings (unless otherwise noted, ta=25 c) symbol parameter conditions ratings unit v in input voltage between pins 1 - 5 , 6 6 5 0 v i o output current between pins 17,18 - 19 ,2 0 1.0 a topr operating temperature no condensation (*1) - 2 0 ~ + 6 0 c tstg storage temperature no condensation - 2 5 ~ +8 0 c viso electrical isolation between input and output sine wave voltage, 60hz, 1min 2 500 vrms (*1) please refer to de - rating characteristics. electrical characteristics (unless otherwise noted, v in = 600 v, ta=25 c) symbol parameter test conditions limits u nit m in . t yp . m ax . v in input voltage recommended range 90 350 600 v vo output voltage io = 0~1 a 4.7 5.0 5.3 v reg - i input regulation io =1 a , v in = 9 0~ 6 0 0v - - 70 mv reg - - l load regulation io = 0 ~ 1 a - - 70 mv v p - p ripple voltage io=1a (*2 ) 80 mv ef ficiency io=1a - 67 - % (*2 ) not contain the spike noise. test circuit diagram caution it is used the electrolytic capacitors which has the low impedance for output capacitor. brank pin ? 2~4, 11~13 pin nc pin ? 9,10,14~16 pin
hybrid ic v la308 - 055r isolated type dc - dc converter 3 t ypical characteristics curves t a = 25
hybrid ic v la308 - 055r isolated type dc - dc converter 4 for safety using great detail and careful attention are given to the production activity of hics, such as the development, the quality of prod uction, and in its reliability. howev er the reliability of hics depends not only on their own factors but also in their condition of usage. when handling hics, please note the following cautions. cautions packing carrying storage extended storage maximum ratings polarity the materials used in packing hics can only withstand normal external conditions. when exposed to outside shocks, rain and certain environmental contaminators, the packing materials will deteriorates. please take care in handling. 1) dont stack boxes t 2) boxes must be positioned correctly during transportation to avoid breakage. 3) don't throw or drop boxes. 4) keep boxes dry. avoid rain or snow. 5) minimal vibration and shock during transportation is desirable. when storing hics, please observe the following notices or possible deterioration of their electrical characteristics, risk of solderability, and external damage may occur. 1) devices must be stored where fluctuation of temperature and humidity is minimal , and must not be exposed to direct sunlight. store at the normal temperature of 5 to 30 degrees celsius with humidity at 40 to 60%. 2) avoid locations where corrosive gasses are generated or where much dust accumulates. 3) storage cases must be static proof. 4) avoid putting weight on boxes. when extended storage is necessary, hics must be kept non - processed. when using hics which have been stored for more than one year or under severe conditions, be sure to check that the exterior is free from flaw and other damages. to prevent any electrical damages, use hics within the maximum ratings. the temperature, current, voltage, etc. must not exceed these conditions. to protect hics from destruction and deterioration due to wrong insertion, make sur e of polarity in inserting leads into the board holes, conforming to the external view for the terminal arrangement. power module division 6 - 41 tsukuba, isahaya, nagasaki, 854 - 0065 japan july . 20 14 keep safety first in your circuit designs! ? isahaya electronics corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. trouble with semiconductors may lead to personal injury, fire or property damage. remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (1)placement of substitutive, auxiliary circuits, (2)use of non - flammable material or (3)prevention against any malfunction or mishap. notes regarding these materials ? these materials are intended as a reference to our customers in the selection of the isahaya products best suited to the customer's application; they don't convey any license under any intellectual property rights, or any other ri ghts, belonging to isahaya electronics corporation or a third party. ? isahaya electronics corporation assumes no responsibility for any damage, or infringement of any third party's rights, originating in the use of any product data, diagram s, charts or circuit application examples contained in these materials. ? all information contained in these materials, including product data, diagrams and charts, represent information on products at the time of publication of these materials, a nd are subject to change by isahaya electronics corporation without notice due to product improvements or other reasons. it is therefore recommended that customers contact isahaya electronics corporation or an authorized isahaya products distr ibutor for the latest product information before purchasing a product listed herein. ? isahaya electronics corporation products are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. please contact isahaya electronics corporation or an aut horized isahaya products distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. ? the prior written approval of isahaya electronics corporation is necessary to reprint or reproduce in whole or in part these materials. ? if these products or technologies are subject to the japanese export control restrictions, they must be exp orted under a license from the japanese government and cannot be imported into a country other than the approved destination. any diversion or re - export contrary to the export control laws and regulations of japan and/or the country of destina tion is prohibited. ? please contact isahaya electronics corporation or an authorized isahaya products distributor for further details on these materials or the products contained therein.
|
